Thursday, October 2, 2008

Sunset: October 1, 2008

Here is the light source:

and the subject.


It must be something about October, Halloween and the color orange.

Practice Does Make Perfect

Yesterday we finally had the chance to open up the bell jar/aluminizing chamber to have a look at how the practice aluminizing went.



Once the top of the chamber was safely removed and placed on the observing floor the glass plates and slides were examined.

The crew checked the glass for any streaks or imperfections and then measured the reflectivity of the samples which check in as high at 91.75%. All-in-all it was a good test of the system. Everyone was happy with the results and the 200-inch mirror is cleared for its recoating in November.

Big thanks go out to Susan for shooting photos for me yesterday while I was off the mountain giving a talk.

Saturday, September 27, 2008

Through the Looking Glass

It looks like we had a successful test of the aluminizing system for the 200-inch mirror on Friday. The chamber wont be opened for a while yet though.

Here are some (hopefully) interesting shots for you. The chamber has a porthole-like window on the side and it is possible for the crew to peak in on the action. I was fortunate enough to be able to grab some photos during the action.

The first shows the first of three glow discharges. A small amount of gas is introduced into the chamber and turned into a plasma (ionized gas). The photo was an exposure of over 1 second and doesn't capture the flickering nature of the plasma. It is a beautiful sight.

The second photo looks into the chamber as aluminum is being deposited. Over 200 tungsten wire coils with aluminum melted on to them lie within. Electricity is applied to the coils in pairs. As this happens they are heated in excess of 1,000 degrees and the aluminum is vaporized. Because all of the air has been pumped out of the chamber, creating a vacuum, the aluminum atoms fly about unimpeded. As each hits a surface they stick and gradually lay down a thin layer of aluminum.

In the photo below you can see two of the tungsten coils glowing brightly and another (in the upper right) that has just finished its job but glowing with residual heat.

Below is a movie of the view looking inside the vacuum chamber. I don't think that anyone other than observatory staff has had the opportunity to see something like this before. The photos used to make the movie were all with a hand-held camera and were all taken with the same exposure speed. This allows you to see the coils heat up and fade away as is described in the photo above.

Enjoy!

Man the Pumps! In 3D

Man the Pumps! Then grab your 3D glasses because here is a 3D photo of the vacuum pumps that work with the aluminizing chamber for the Hale Telescope's 200-inch mirror. Make sure that your glasses have red on the left.

Stay tuned for some cool shots & maybe a movie looking into the tank from when we did our test fire yesterday.

News & Events

Lots of things going on these days.

The November issue of Sky & Telescope magazine just hit my mailbox. Of possible interest to the readers of Palomar Skies is the article on Hale, Ritchey and Mt. Wilson's 60-inch telescope (which turns 100 years old this year). Also, at the end of the magazine you'll notice that there will be an article on The Journey to Palomar in next month's issue.

Speaking of The Journey to Palomar, they will be having a NASA webcast for students & teachers on Wednesday, October 8. During the webcast they will show off some of the achievements of Hale, the next generation of giant telescopes & a new mission to the Moon.

Friday, October 3rd @ 6 pm I'll be giving a visual tour of the universe at the Starry Nights Festival hosted by the Hi-Desert Nature Museum in Yucca Valley, CA.

On October 17th @ 8:30 pm I'll be giving a talk on the history of Palomar Observatory at the Bianchi Planetarium at Cal State Northridge.

UPDATE: (if this works) Here's a radio spot for the Starry Nights Festival.

Friday, September 26, 2008

Hale Telescope

No caption, just the view yesterday afternoon.

Thursday, September 25, 2008

SWIFT Uncrated

SWIFT, the new instrument from Oxford, England arrived last week and today it was safely unpacked. All seems to have survived the transit across the pond. Now the real work begins for the SWIFT team as they prepare the instrument for first light in mid-October.




Practice Makes Perfect

In November we will be pulling the 200-inch mirror out of the Hale Telescope and re-coat the surface with a new layer of aluminum. We do this every year and a half to two years. To say that it is an involved procedure is a huge understatement.

So when you have a complex procedure that involves most of the staff working on the most precious thing you have (the 200" mirror) and you only do this every couple of years or so it is a good idea to practice. We've been working a practice session this week.

The way we practice is to take a large aluminum disc, that is the same size as the real mirror, and use it as a stand-in. This dummy mirror will then get enclosed in a giant bell jar. The air will be pumped out and a small amount of aluminum is vaporized and deposited on the surface. The procedure is similar to what we did for our 60-inch mirror, only more so. If you click on the image above to see the larger version you might notice some 14-inch glass photographic plates and some glass slides that have been placed on the disc.

After all is said and done we will be able to examine the glass samples to study the coating that we applied.

To get all of this to happen you've got to lift the 17.5-ton top of the bell jar up off of the dome floor and down over the mirror, or in this case the dummy mirror. Here are some views of yesterday's lift.
From this vantage point you can see into the aluminizing chamber (aka the bell jar). Here's a better look inside:
Inside are over 200 tungsten wire filaments that have had a small amount of aluminum melted into them.


Once everything is together, the pumps begin to work and a day or so later it is time to "fire" and apply the new coating.

Pumps are working as I type and the firing of the coils should happen tomorrow.

Wednesday, September 24, 2008

Hale Telescope Shakedown

Every once in a while you need to give your telescope a shakedown just to make sure that everything is exactly the way you want it and that it will not move during the night. We gave the Hale Telescope just such a shakedown last week.

And here's a really short movie of the shakedown taken by the Hale Telescope web cam and put together by the good folks at HPWREN.


Saturday, September 20, 2008

Palomar in Science Fiction - I

Thanks to Palomar Skies reader George S. for pointing out to me that the Palomar Observatory was featured in Rocketship X-M, a SciFi movie from 1950. The movie stars a very young looking Lloyd Bridges as one of the pilot of the rocket. Hugh O'Brian who plays Harry Chamberlain - an astronomer of the Mt. Wilson and Palomar Observatories.

In the film a crew of five takes off on the first voyage into space with the Moon as their destination. Somehow they end up off course and make it to Mars. Curiously enough as the rocketship decends to Mars the landscape does bear a resemlance to the real Red Planet. Craters and a dry riverbed can be seen.


Of course any hint of the real Mars is blown away as the intrepid explorers are greeted by a thunderstorm as they touchdown on the Martian surface.

Here is a video clip of the Palomar 200-inch telescope in Rocketship X-M.



The Palomar Observatory has appeared in other science fiction movies (and in novels too!). I'll post some clips from other movies in the near future, but if you know of any science fiction films that show the observatory please send me an email or post them in the comments. Thanks!